“SAIDEEP” has come out with a most advance design of screens for grading of fine, wet and difficult to screen materials. The screens works on the principle of gyratory motion. The unique features of this type of sieve is its high capacity using minimum space and less power. The screen has specially designed multi-directional vibration system which prevents blinding of sieves. The material to be screened is fed from the top and collected simultaneously from outlets of different decks. These screens can handle wide range of materials such as heavy, light, dry, wet, coarse or fine. The company manufactures various sizes to suit individual requirement in M S and S S construction.
Dimension Chart of Vibro Screen / Sifter

MODEL	SCREEN SIZE	DISCHARGE HEIGHT			H	MOTOR HP
		HI	H2	H3
SVS-02	600	410	530	650	930	5
SVS-03	900	510	665	845	1165	1
SVS-04	1200	550	750	965	1350	1.5
SV5-05	1500	720	975	1285	1775	5
SV5-06	1800	720	1015	1310	1800	5
Due to continuous innovations in design above parameters are subject to change.

Unique Features Perfect Separation Due to advanced vibration technology the separation is near perfect. Long Screen Life The screen cloth is held in the frame very tightly by a special process. This gives long life to the screen. No Clogging of Screen As the screen vibrates in multiplane hence the holes of the screen remain clear. Additional antiblinding system is provided for difficult to screen and wet materials. Compact Design This screen occupies less than half the spaces as occupied by any other screen of same capacity. Useful in wet screening The screen works on solid-liquid separation efficiently. Replacement of Screen Frames Replacing or adding of extra deck and screen frame is simple operation. Even lower deck could be changed without disturbing the upper deck. Multi Purpose Versatile Use Due to its unique design, the same screen can be put to multi purpose use. Totally Enclosed Pollution Free The Screen is totally enclosed so that no dusting takes place even in the finest classification. Economy In Power Consumption This design of machine consumes less power than other traditional screens of identical capacity. Material of Construction The screen is normally manufactured using all the contact parts of AISI 304 stainless steel. However, screen in M.S. Construction can be manufactured on request due to cost consideration. Silent Operation The machine has perfectly designed coil springs so that no vibrations are transferred on the floor.

“SAIDEEP” has come out with new design of unbalance Vibro Motor from 0.1 kw to 6 kw and centrifugal Force up to 70,000 N. These Motors are used for Vibrating Feeders/ Vibrating Tables and on silos for proper flow of sticky material. These Motors are also used in sieving Machine for grading of fine powders and filtering of liquids.

Applications : The quality vibro-motors supplied by us are used in various industrial applications, including - Its operation is noiseless as compared to electromagnetic vibration and pneumatic vibration and thus is preferred over them. Used in screens, sifters, conveyors, feeders, bin vibrators, vibrating tables, graders, compactors and in grinding and finishing machines. The vibro motors are also widely used in continuous process plants, such as - chemicals, fertilizer, petrochemical, plastic, mining, food processing and packaging industries. Specifications Centrifugal forces - 500 N to 60000 N Frequency - 12 Hz to 48 Hz Power consumption - 200 watts to - 4 kW Maximum vibratory mass - 3000 kg Power Input - 415V. -3 phase AC. Features Robust Design Body made from high grade C.I.Casting Totally dust proof air cooled design Can operate in dusty environments. Complies to IP.55 specification. Winding F-Class Impervious to dust, moisture and vibrations. Vibration force adjustable From zero to maximum by adjusting position of unbalance weights provided on both sides of the motor shaft. Wide Range From 2 to 6 pole with various standard Models. Silent Operation Unlike Electromagnetic Vibration, SAIDEEP Vibrator Motors make o unpleasant sound. Service Continuous sevice (S1) and intermittent operation of maximum Centrifugal force. Tropicalizing Motor winding is vacuum impregnated. Terminal Box Terminal Box connector sealed with layer of resin to prevent damage due to vibrations. Drive Shaft Made from over sized alloy steel (Hardened & Tempered) to stand, stress at high speeds. Frequency 12 Hz to 48 Hz. Power consumption – 200 watts to – 6 kw. Maximum vibratory mass 3000 kg. Power Input 415 V – 3 Phase A.C. Flange mounting & wedge mounting models also available.

“SAIDEEP” manufactures Pneumatic Vibrator in three designs, pneumatic turbine vibrator, pneumatic ball vibrator and piston vibrators. These vibrators are light and can be easily installed in any position directly to the structure to be vibrated.

These vibrators can be used in application such as declogging of Hoppers, Chutes Vibratory Feeders, Table and Screens. Pneumatic Vibrators are most suitable for hazardous area where flame proof equipment is required. Various models are available for Individual application.

Some times material stored in the hopper does not flow at all, even after fixing Vibrator or Unbalance Motor on outside surface. This is due to physical properties of powder its particle size and moisture content. For such difficult powders our “BIN ACTIVATOR” is the right answer.
OPERATION :

The Bin Activator designed by us consists of a conical shape discharge zone that is connected to storage silo or hopper through a set of steel hangers. The gap between the hopper and discharge zone is sealed with the help of a special flexible rubber sleeve. The material is made to flow normally through the opening provided at the discharge point with the help of one Unbalance Vibrator motor that is fixed on one side.

APPLICATIONS :

Bin Activator has been successfully tried on all difficult to handle products like surphur and its compounds, fine mica powder and other minerals, ores titanium dioxide, wood chips, salt, sugar and such other fine, flaky, fibrous and sticky materials.
WIDE RANGE :

• Available for silos from 600mm dia. To 3000mmdia.
• Made from M.S.,S.S – 304, S.S – 316 or abration resistant steel.
• Epoxy coated or Teflon coated for food application.

TECHNICAL CHART : DIA A DIA B OUTLET C HEIGHT H G MOTOR H P 600 710 150 575 620 0.50 750 890 150 625 710 0.75 1000 1130 200 675 890 1.00 1250 1400 200 775 1025 1.50 1500 1650 200 925 1150 1.50 1750 1800 200 1050 1235 2.00 2000 2150 250 1175 1450 3.00 2500 2650 250 1350 1700 3.00 3000 3150 250 1600 2000 5.00

Principle of Operation
The electromagnetic vibratory feeder consists of a tray made of mild steel and a body housing the electromagnet. The tray which is connected to the armature of the magnet vibrates as the magnet gets energised. The vibration sets the material in motion. Controlling of vibration gives the controlled flow of the material. The body housing the electromagnet is made in totally enclosed design to prevent dusting.
Useful to any continuous process industry where automatic controlled flow of material is required.

Applications
Electromagnetic vibratory feeders are very useful in plastics, rubber, food, pharmaceutical, chemical, fertilizer, glass and other allied industries. vibratory feeder can be supplied either in floor mounted or suspension mounted design as required.

Capacity
Electromagnetic vibratory feeders can be supplied from few grams to 100 tons per hour capacity or more.They can also handle slightly wet material. Electromagnetic vibratory feeders can be used for screening by fixing a screen over the tray. These screens have been very successful for screening free flowing material, as the use of moving parts, eccentrics, etc. have been completely eliminated in this equipment. The vibratory feeders tabled below, operate at 230 Volts A.C. single phase system. The bigger size feeders beyond 100 T.P.H. operate at 440 Volts A.C. single phase.

Vibratory Feeder Model	Tray Size in mm	Capacity / Hour.( for Material with Density 1500 Kgs / Cubic Mtr.	Power Consumption
SDF- 1	150 x 500	5 Tons	100 Watts.
SDF- 2	250 x 600	10 Tons	200 Watts.
SDF- 3	300 x 900	25 Tons	350 Watts.
SDF- 4	500 x 1000	50 Tons	600 Watts.
SDF- 5	600 x 1200	75 Tons	900 Watts.
SDF- 6	750 x 1500	100 Tons	1200 Watts.

We are engaged in offering the vibrating tables that consist of solid base plate along with vibrating top. Manufactured using premium grade raw material and latest technology, the tables are durable and reliable and require low maintenance. These tables are very useful in the testing of delicate joints in electrical industry and in the testing of welded joints in automobile industry. Our range is widely applicable in the packing of products, achieving uniformity in ceramic molded parts and eliminating voids in molded parts.

The electromagnetic vibrating tables we offer consist of solid base plate along with vibrating top. The top platform of the vibrating tables vibrates 3000 vibrations per minute through an electromagnet housed placed inside. Our entire range of vibrating table is offered with a control panel that supplies vivacious current to electromagnet and also controls the amplitude of vibration. Control panel are in operating condition on 230 V.A.C. single phase.

APPLICATIONS :
Vibrating table is very useful in several industries
A. For testing of welded joints in automobilie industry.
B. For testing of delicate joints in electronic industry.
C. For effective packing of fluffy and difficult to handle powder in chemical and pharmacuetical industry.
D. For proper flow of powder in dies and moulds to get perfect moulded parts.

We offer an extensive range of impact type vibrators that is fabricated using premium quality raw material. The range is easy to install and operate and require very less maintenance. The vibrations caused by the pulsating current can be restricted by controlling the input voltage and if necessary the regulator is also provided in the control panel. It is applicable in the effective packing of powder in chemical and pharmaceutical industry and is also used for the proper flow of material in conical shaped hopper.

Our range of electromagnetic impact type vibrators consist of main body which houses the coil. These coils are coursed with pulsating current that sets in the vibration. The amplitude of vibration can be restricted by controlling the input voltage. The vibrators can easily be installed and requires very less maintenance. The strength of vibration can be controlled if necessary by providing regulator in the control panel.

Application:

• For inclined discharge chutes to produce an easy flow
• For rectangular or cylindrical bin with center discharge
• For effective packing of fluffy and difficult to handle powder in chemical and pharmaceutical industry
• For proper flow of material in conical shaped hopper

Capacity:

• The vibrators are made in various power ratings ranging from 25 Watts to 500 Watts. It is important to use the vibrator of correct rating
• The vibrator model depends on the wall thickness of the hopper
• The design and the capacity of the hopper determine the number of vibrators to be used
• When more than one vibrator is required to be installed on one hopper, they should be connected in same phase
• All the vibrators are designed to operate at 230 Volts. A. C. single phase system
• The vibrators at higher voltage can be manufactured on request
• Each vibrator will be provided with a control cabinet to convert A. C. to pulsating D. C. except model SDV-1

Vibrator Model	Capacity Cubic meters	Wall thickness of Hopper	Power Consumption
SDV- 1	0.05	1 mm.	25 Watts.
SDV- 2	0.25	2 mm.	50 Watts.
SDV- 3	0.5	3 mm.	100 Watts.
SDV- 4	1	4 mm.	200 Watts.
SDV- 5	1.5	5 mm.	300 Watts.
SDV- 6	2	6 mm.	400 Watts.
SDV- 7	3	7 mm.	500 Watts.

We offer diamond sorting machines that are widely applicable in diamond industries for the extensive operation of sorting diamonds according to different sizes. Manufactured using quality raw material and advanced technology, these machines are user friendly and gives you better efficiency and greater sorting accuracy.

We manufacture a wide gamut of diamond shape sorting machine, which finds extensive application for sorting diamonds in accordance to the shape. These are useful for our clients who deal in bulk quantity of diamonds.

The vibratory screen offered by us is applicable in different industries for various applications. It is mainly used to grade materials in to small particle sizes. The screen also contain electromagnet housed in total enclosure to prevent dusting. Fabricated using mild or stainless steel, it is available in different dimensions and sizes. Typical application areas of vibratory screen are chemical, fertilizer, glass and pharmaceutical industry.
Our assortment of motorized vibratory screen encompasses a perforated sieve tray that is developed using mild steel or stainless steel. The perforated sieve is fixed to the sieve body, which is placed on a frame. The vibrations are controlled and hence give controlled flow of the material. The housing of the motor is in an enclosed design to prevent from dusting.

Application Areas:

• Plastics
• Rubber
• Ceramic
• Food
• Pharmaceutical
• Chemical
• Fertilizer
• Glass industries

Our range of vibratory screens can also be provided with dust proof cover as required by the customers.

We are also proud to state that we are one of the few counted names to offer motor vibratory conveyor that consists of a horizontal tray made of mild steel or stainless steel. This horizontal tray is fixed to the frame, and the vibration is produced by two special unbalance motors which are fixed on either sides of the tray.We offer wide range of vibrating equipments like conveyor and feeders.


The complete assembly of tray with motor rest on a set of coil springs so that, no vibrations are transmitted to the stand and ground. As the Motor starts, the vibration sets in motion and further help in controlled flow of the material. The motor operates at 400/440v 3 phase A.C. system at 1440 RPM. It is highly useful in plastics, rubber, ceramic, food, pharmaceutical, chemical, fertilizer and glass industries.

The motorized spiral conveyor offered by us consists of mild steel spiral trays. The conveyor is fabricated using premium quality raw material and advanced technology in compliance with industry quality standards. Easy to install and operate, the spiral conveyor is durable, reliable and require low maintenance.

The motorized spiral conveyor we offer a number of spiral trays which is manufactured using mild steel. The main body attached with vibrating motor is linked to the upper spiral tray body. As the Motor starts, the vibration sets the material in spiral upward motion. The body housing of the motor is enclosed to prevent from dusting. The motorized spiral conveyor screen works on standard frequency of 3000 vibration per minute with max. amplitude of 1.5 mm. to 2 mm. depending on the size of the screen. Application Areas: Plastics Rubber Ceramic Food Pharmaceutical Chemical Fertilizer Glass industries

The vibratory screen offered by us is applicable in different industries for various applications. It is mainly used to grade materials in to small particle sizes. The screen also contain electromagnet housed in total enclosure to prevent dusting. Fabricated using mild or stainless steel, it is available in different dimensions and sizes. Typical application areas of vibratory screen are chemical, fertilizer, glass and pharmaceutical industry.
The electromagnetic vibratory screen we manufacture consists of perforated sieve tray fabricated using mild steel, stainless steel & a body housing the electromagnet. The perforated sieve tray attached to the armature of the magnet vibrates as it gets charged. The material is position by the vibration. Controlled vibration gives the control over the flow of material. The body housing of the electromagnet is eventually designed in totally enclosed manner to prevent dusting. The perforated sieve tray is called screen deck. The electromagnetic vibrating screen works on standard frequency of 3000 vibrations per minute with maximum amplitude of 1.5 mm. to 2 mm. For special application 1500 vibrations per minute or 6000 vibrations per minute can also be offered to the clients.

Applications:

• Plastics
• Rubber
• Ceramic
• Food
• Pharmaceutical
• Chemical
• Fertilizer
• Glass

Capacity:
Electromagnetic vibrating screens are offered in different sizes depending upon capacity required. These machines have the capacity to handle slightly wet material. Electromagnetic vibratory screens can be used for screening and grading of material by fixing a screen deck over the housing of electromagnet. These successfully screen free flowing material, as the use of mechanical parts eliminate in this application. The vibratory screens operate at 230 Volts A.C. single phase system.

We manufacture and export a wide range of motorized vibrating conveyor that is fabricated using premium quality raw material. The conveyor comprises of mild steel horizontal tray that rest on the set of coil springs. The controlled vibrations gives the controlled flow of the material. Easy to operate and maintain, the conveyor is durable and reliable and is also custom designed as per the requirements of client.

We are engaged in manufacturing of motorized vibrating conveyor in compliance with international standards. Fabricated using mild or stainless steel, the conveyor is durable, reliable, high in performance and require low maintenance. It comprises of stainless steel horizontal tray and two special unbalanced motors fixed on both sides of the tray. The motor is placed in an enclosure to prevent dust. The range is custom designed as per the requirements of client.

Application areas:

• Fertilizer
• Pharmaceutical
• Ceramic
• Plastics
• Glass industries
• Rubber
• Food

Vibration has been very fascinating subject for man since ancient times. With the advent of new technologies, man has mastered the art of creating and controlling vibrations. In our design of the bowl feeder, the vibrations are created in spiral fashion so that, the components placed on the bowl which is fixed to the vibrating unit start moving round and round. The bowl being custom built for the perticular component, has a peculiar geometry.

As component moves round and round up the track till it gets oriented and comes out in the desired form. This process of orienting is very useful on assembly line and packing operations, as no manual labour is employed for feeding of components.

Range :

We manufacture bowl feeder from a small 200mm. diameter bowl to 1000mm. diameter bowl in M.S. or S.S. Each bowl is designed and manufactured according to the need of customer to give proper orientation and trouble free service.

Operating Principle :

The bowl feeder works on D.C. pulsating supply obtained from converting 230V.A.C. single phase by use of rectifier or thyristor circuit. Each unit is supplied with a control panel to supply D.C. power to the vibrator and control the feed rate. As the supply frequency is 50 Hz, the bowl feeder operates at 3000 vibrations per minute at 1.5mm. amplitude (maximun).